Measuring guides

Jeans – Tops

WAIST

Lay your jeans flat and measure across the waistband. Check the corresponding “size tag” for your model.
Note: We use vanity sizing for most of our fits. This means a “size tag 32” is not actually 32 inches according to the waist measurement.

HIPS

Place the tape approx. 0.5 inch/1.25 cm over the bottom of the fly and measure from edge to edge of the jeans.

THIGHS

Measure 1 inch/2.5 cm below the crotch seam and across the thigh. Make sure you get all fabric on both front and backside.

FRONT RISE

Measure from the top of the waist band down to the crotch seam. This measurement is the same with our 5 button fly.

BACK RISE

Flip the jeans over and do the exact same as with the front rise. From the top of the waistband down to the crotch seams.

KNEE

Measure 14 inch/35 cm below the crotch seam across. This measure can vary depending on inseam length.

LEG OPENING

Lay flat and measure across the bottom hem of your jeans. This measurement may vary due to the thickness of the fabric.

INSEAM/LENGTH

Measure from the inside of the crotch all the way down to the leg opening. Inseam is decided by the customer. We offer everything between 5-12″ for shorts, 25-44″ for jeans.

Men's fit

SKINNY LUKE

Luke is a narrow fit, suited for stretch denim or skinny legs. Luke is a mid rise model and is straight from the hip, down to the leg opening. 

measurements

SKINNY LUKE

Since all products are manually made on non-automatic machines,
and fabrics may perform different when sewn,
a variance of +/- 1" or 2.5 cm is within tolerance.

SLIM DARRYL

Darryl is a unisex, slim tapered fit with a low rise and narrow hips. It’s straight from the hip, through the thigh, and tapered down to the leg opening.

measurements

SLIM DARRYL

Since all products are manually made on non-automatic machines,
and fabrics may perform different when sewn,
a variance of +/- 1" or 2.5 cm is within tolerance.

SLIM DARRYL HIGH

Slim Darryl High Rise is a higher back rise version than Slim Darryl. Overall it’s the same fit. 

measurements

SLIM DARRYL HIGH

Since all products are manually made on non-automatic machines,
and fabrics may perform different when sewn,
a variance of +/- 1" or 2.5 cm is within tolerance.

TAPERED JEREMY

Tapered Jeremy is a classic mid-rise, normal hip model. Jeremy is slightly tapered from the knee down to the leg opening. 

measurements

Tapered Jeremy

Since all products are manually made on non-automatic machines,
and fabrics may perform different when sewn,
a variance of +/- 1" or 2.5 cm is within tolerance.

LOOSE CANNON

Loose Cannon is a mid-rise fit, with more space in the thigh area, but extremely tapered from the knee down to the leg opening. Perfect for athletes.

measurements

LOOSE CANNON

Since all products are manually made on non-automatic machines,
and fabrics may perform different when sewn,
a variance of +/- 1" or 2.5 cm is within tolerance.

CLASSIC SELVEDGE FIT

Selvedge Fit is a regular, high rise straight fit, perfect for heavier denims and selvedge fanatics. CSF resembles Levi’s 501 cut. 

measurements

CLASSIC SELVEDGE FIT

Since all products are manually made on non-automatic machines,
and fabrics may perform different when sewn,
a variance of +/- 1" or 2.5 cm is within tolerance.

BILLY BOOTCUT

Billy is a bootcut fit. It has the same rise as Jeremy. It’s straight from the hip down to the knee, ends with a flared leg opening. 

measurements

Billy Bootcut

Since all products are manually made on non-automatic machines,
and fabrics may perform different when sewn,
a variance of +/- 1" or 2.5 cm is within tolerance.

STRAIGHT STEN

Sten is a high-rise slim 70’s version with a modern twist. From the knee down, it’s completely straight which makes for a perfect selvedge cuff model.  

measurements

CLASSIC HIGH RISE LADY

Classic High Rise is a women’s high waist, slightly tapered from knee to leg opening. Suitable for a non-stretch fabric bur recommended to go with a stretch fabric.

measurements

CLASSIC HIGH RISE LADIES

Since all products are manually made on non-automatic machines,
and fabrics may perform different when sewn,
a variance of +/- 1" or 2.5 cm is within tolerance.